Sonicwall NSA 220 Ports not showing as open
HI,I have been working with a sonicwall NSA 220 and have been able to open ports. But for some reason Once I go through the process of opening ports some are still showing as closed when i do port...
View ArticleSonicwall Content Filtering - Exclude devices by IP Range not working
Hi GuysI have Sonicwall NSA220 running Firmware: 5.9.0.7-17o.I've tried to configure an IP address range to bypass the CFS but it doesn't seem to be working. The devices are still blocked. I'm...
View ArticleTeamviewer "reunion"
Hello.I have A TZ215 Sonicwall appliance.I have activate "app control advenced", desactivated "teamviewer" in the "remote-access" category, but i still have problem.Teamviewer was not blocked.If i...
View ArticleSonicwall NSA4600 Allowing Social Networking with Multiple Browser Refreshes
We have a school with a NS4600 installed in May. It has SSO enabled and separate Content Filtering Policies for each peer group.We also have DPI-SSL set up.It appears that students can get around the...
View Articletwo sonicpoints connected to NSA 3500, can each SP have different SSID??
We are having a lot of problems with two ceiling-mounted SonicPoints.Connections are lost after 15-20 minutes then are difficult to regain/maintain.The SPs are about 80 feet apart, could it be they are...
View ArticleDNS issue when workstation has static IP
Hi,I set up a SonicWall the other day, and I'm having an issue on 2 workstations. These two workstations have static IPs. The other workstations use DHCP. Those using DHCP can access the Internet with...
View ArticleNSA 250M
I opened a support call because I could not get the firewall to block/allow WAN access based on MAC address. I setup the MAC address as an address object and then tried to apply that in Access...
View ArticleNo LDAP Option
Hi!LDAP Option is missing under User Authentication Method. Only Local Users is selected.NSA 5600Sonicwall Enhanced 6.2.2.0.12nAny Suggestions?Thanks.
View ArticleUpgraded from NSA-240 to TZ 600 getting a message in console
I recently upgraded my NSA-240 running SonicOS Enhanced 5.9.0.7-17o to a TZ 600 running SonicOS Enhanced 6.2.4.2-20n. I exported the settings from the NSA-240 and imported them into the TZ 600 and...
View ArticleAD Integration not filtering Users or Groups
Hi!We have enabled LDAP Integration on Sonicwall and imported the groups and users from AD but when we are enabling lan to wan rule and adding a group or user as allowed users, all users are able to...
View ArticleGlobal VPN client for Windows 10
Currently using 4.9.0.1202 however sometimes it work and other times I get RDP error "An internal error has occurred".The Sonicwall VPN client software always connect and I can ping resources on the...
View ArticleTZ210 Multiple public IPs
A client has a TZ210 Sonicwall that we have been using for RDP and RDS connections. Currently they have a public ip of xxx.xxx.xxx.89. They recently purchased a new software that pulls tractor trailer...
View ArticleNSA-5600 DPI-SSL option
server DPI-SSL setting with PFS, does this feature available in NSA-5600 UTM ?, we are publishing web site and it is highly secure site, site is failing with PFS on test, we are closing on time, please...
View ArticleWorkflow to assign Qos/BWM/Voip for a PortShield NSA220W ?
We've uplinked a PoE switch to the X6 of our NSA220W (firmware 5.9.1.0-22o), and since it's only handsets on this PortShield, how can we set up QoS/BWM for this, and what is the workflow?I figured it...
View ArticleSite to Site VPN, But I only want one way traffic
I Have 2 SonicWALLS with a site to site connection. I want Company A to access any and all resources on Company B's Site. But I do not want Company B to access ANY of Company A's Assets besides what I...
View ArticleTunnel Interface(s) on NSA 3600 / SonicOS 6.2.2.2
Hello everyone!My name is Christian, I am from Hagen / Germany and I work as systems engineer for a medium-sized company.While setting up a route-based VPN between our NSA 3600 and a Cisco Router I...
View ArticleTZ 500 Dynamic DNS No-Ip.com (invalid account)
I try setup a Dynamic DNS with No-Ip.com service in my TZ 500 (SonicOS Enhanced 6.2.3.1-19n) but when i setup up the ddns i got (invalid account) in the status message. Why? What's the problem?
View ArticleBlocking MiTM (Man in the Middle) attack
I am failing a PCI scan. I have a TZ400 with IPS turned on. but the PCI scan is failing with:OpenSSL 'ChangeCipherSpec' MiTMVulnerability www (443/tcp)CVE-2010-5298, CVE-2014-0076, CVE-2014-0195,...
View ArticleUnable to Register a NSA2400 ???
Hey all,I already have a NSA2400 , which is still on the old old firmware, 5.5.1.0-5oHavent ever upgraded the firmware, as didn't feel the need, but with a new VOIP (Mitel) solution coming soon, it...
View ArticleNão bloqueia HTTPS
Good afternoon everyoneI'm trying to block netflix.com site for users who logam via SSO and who are included in a group imported from the Active Directory for Users / Local Groups on the SonicWALL....
View Article